Tag
protection
6 articles.
- How ESD protection works: why layout is half of the diode
An 8 kV discharge is 150 pF through 330 Ω: 30 A in under a nanosecond. A TVS turns that into 10 V; TI's layout guide shows every nanohenry adds 40 V.
- Inrush current limiter: sizing an NTC, or using a MOSFET
A discharged bulk capacitor is a short circuit at power-on. Sizing the NTC takes three numbers from Ametherm and TDK, and knowing when a MOSFET is better.
- Why a relay has a flyback diode, and why it slows release
A flyback diode gives the coil current a path, so the switch sees 12.7 V instead of hundreds. TE's note shows the cost: slow release, and welded contacts.
- Reverse polarity protection: diode, MOSFET or ideal diode?
A Schottky costs 0.4 V and 4.65 W at 10 A; a P-channel MOSFET costs 35 mV but lets holdup capacitors drain backwards; an ideal-diode controller does neither.
- How much current melts a PCB trace
Onderdonk's equation, where it stops being true, how it compares against IPC's continuous rating, and why a resettable fuse can be slower than the copper.
- How to choose and place a TVS diode for ESD protection
Why a 5 V TVS hands the pin 10 V mid-strike, which datasheet numbers predict it, and the placement rules that stop loop inductance adding 40 V per nanohenry.